How to Fix the SimpliSafe Outdoor Camera Flashing White But Won’t Connect?
In the modern landscape, SimpliSafe security devices are one of the primary gadgets that guard your premises. Likewise, these are outfitted with wireless technology and other advanced functionalities. Besides this, users sometimes encounter SimpliSafe outdoor camera flashing white but won’t connect issues. However, this is a very common problem that can easily be resolved.
On the other hand, a blinking white LED on the camera indicates that it is ready for setup but if it flickers repeatedly for a long time, then this may be an issue. Therefore, to assist you with the detailed information, we share this brief post with you. This will guide you through the reasons behind the SimpliSafe camera flashing white continuously and troubleshooting tips to resolve this error.
Reasons for SimpliSafe Outdoor Camera Flashing White But Won't Connect
While you are going to fix the SimpliSafe camera blinking white error, then must find the reason behind it. In this section, we share the primary causes due to which your security device continuously blinks white, so take a look once:
- Inaccurate bandwidth
- Unstable or no network
- ISP issues
- Outdated firmware or corrupted file version
- Technical glitches and bugs
- Enabled security extensions on the router
- The SimpliSafe camera is not linked to the base station
- Faulty cables or loose connections
- The camera is out of the router/mesh network range
What are the Easy Fixes for SimpliSafe Camera Blinking White?
Moreover, you are now aware of the causes which are responsible for the flashing white light. So, it is necessary to fix them timely for the optimal functioning of the camera. Here, we shed light on the essential troubleshooting tips that can easily fix the SimpliSafe outdoor camera flashing white but won’t connect issue, take a glance beneath:
Change the Bandwidth to 2.4GHz
While you are configuring your security device, it is necessary to enable the 2.4 GHz bandwidth on your router. Hence, if you face white light issues on your surveillance gadget, then check the settings of your networking device. If bandwidth is 5Ghz, then shift it to 2.4Ghz.
Stabilize the Internet Connection
If you are connected to the wireless network and face problems with it, then use an ethernet cable. Connect this cord to your router and it stabilizes the connection and strengthens the wifi signals.
Approach Your ISP Authority
If you are facing persistent network issues and are unable to fix them or there is no network on your networking device, then must contact your network service provider. Sometimes, they restrict the network connection access or the local area network is disconnected. So, they will guide you through the exact problem and with a suitable solution.
Update Camera Firmware
Occasionally, the SimpliSafe camera blinking white error occurs if the firmware of the camera is outdated or the file is corrupted. Additionally, it is necessary to access the camera settings and check for updates. If needed, then upgrade the firmware and also delete the corrupted or incompatible file version.
Reboot the SimpliSafe Camera
Sometimes the camera may not join the local area network if there are technical issues or bugs present on your surveillance e device. So, to fix it, power cycle the camera and the base station and it will give a fresh start to your security system.
Disable the Security Software on Your Router/Mesh
The enabled security extensions on your networking device will restrict the network connectivity for your camera. So, this will give rise to the SimpliSafe outdoor camera flashing white but won’t connect error. Hence, temporarily disable the security software on the networking device and then connect it to the network.
Reconnect the Base Station and Camera
Sometimes network disconnectivity appears if the camera is not linked to the base station. Therefore, check that the base station is connected to the home network wirelessly or through a network cord. Similarly, check the signal strength and check wifi indicator on the base station or use the SimpliSafe Home Security app.
Check Network Cable Connections
If you face the camera flashing white continuously, then check the network cable connections. Make sure none of the cords are damaged or tangled. Also, look at the connected cables as connections are not loose, if you find a loose connection, then tighten it. Similarly, replace the damaged cable and use the original adapter only.
Place Camera and Base Station Within the Router’s Network Range
When you position your security gadget out of the router/mesh network’s range, then the camera will not connect to the network. So, it is recommended to position your security system closer to the wireless networking device while configuring.
Hard Reset the SimpliSafe Camera
If nothing else works to resolve the security camera connectivity issues, then factory reset the SimpliSafe camera. This will bring your surveillance device to default settings and you have to reconfigure it from scratch.
If you are Still need to find out more? Reach out to us here!
FAQs
Why is my SimpliSafe Camera Not Flashing White?
This may happen if the security device is unable to connect to the wireless network or the camera battery is very low which prevents it from joining the network.
What Does the Normal White Blinking Light Indicate on Your SimpliSafe Camera?
The common blinking white light for a limited time on your SimpliSafe surveillance device depicts that the camera is ready for setup.
Which Light Detects That the SimpliSafe Camera is Not Connected to the WiFi?
The solid Blue LED on your security camera shows that it is linked to the network.